Thus, wooden boat building can be just another woodworking project for some. there are different methods with which you can build a wooden boat. probably the easiest and most cost effective would. Lapstrake/clinker is the method of wooden boat building where the planks overlap rather than butting each other. while an underlying back bone is needed, the framing can be done after the planking and ribbands may not be needed.. For the home boat builder (last up-dated 28/08/09) there are many methods of construction available to the home boat builder - on this page l will discuss the most popular methods used and compare them so that the new builder can make a good choice for his/her boat building project..
The “stitch-and-glue” construction method is the easiest way to build a boat, as tens of thousands of amateur boatbuilders will testify. the approach, which emphasizes the use of epoxy adhesives and strategic fiberglass reinforcement combined with marine plywood, is ideal for first-timers.. This is greatly enhanced by the boat's ease of handling, storage, and transportation. building a small craft is well within the capabilities of any handy man or woman.. Descriptions of various boat building methods for the amateur boat builder, including plywood, stitch-n-glue,steel,one-off fiberglass, and aluminum. for a description of the boatbuilding methods used to build the boats in glen-l catalog see the various catagories listed below..
Comments
Post a Comment