Traditional ply on frame construction consisted of making quite a heavy framework which was usually a combination of transverse frames and longitudinal stringers, hog etc on a flat building berth and then putting on the ply hull skin oversize and trimming it back.. More fairing on the keelson and the frame and starting to work on the stem size and shape. Redwing 18 hull frame the picture above shows a plywood and fiberglass frame along the side and a stringer along the bottom strong no bevelling no expensive wood.
Plywood on frame. before stitch and glue method to build a boat became popular, plywood boats were often made by constructing a framework which was then sheathed with plywood. the plywood would be affixed to the frames using a variety of methods such as glue, screws and even nails, nowadays it is normal to use epoxy.. There are many methods of construction available to the home boat builder - on this page l will discuss the most popular methods used and compare them so that the new builder can make a good choice for his/her boat building project. ply over frame: plywood glued/fastened over a rigid framework.. Before building the boat. one great idea is to build a pair of saw horses. you’ll need them to build the boat and it will give you a give you a chance to get used to the tools. to build a spira international ply on frame boat design, following is a list of suggested tools you’ll need..
Comments
Post a Comment